The Trenz ElectronicBaseboard TEMB0010 has been designed and developed especially for the use of the Trenz Electronic module TEM0010.

Key Features

• B2B Connector
  • Samtec SS5 B2B connectors: 2 x 80 pin

• Supported SoM
  
  • TEM0010
• I/O resources
  • RJ45 - GBit Ethernet
  • SFP+
  • HDMI
  • M.2 Key M, 4 x Transceivers
  • USB 2.0 Type C (JTAG + UART)
  • USB 2.0 Type C (OTG)
  • MIPI
  • micro SD slot (Dependent on DIP switch S2C and/or module design either micro SD slot or eMMC is usable.)
  • 2 x CRUVI LS
  • 2 x CAN
  • Pin header for FlashPro4
  • 2 x pin header for I2C
• Clock source
  
  • 25 MHz Oscillator for Ethernet
  • 100 MHz Oscillator for M.2
  • 125 MHz Oscillator for transceiver
  • 12 MHz Oscillator for FTDI
• ON-Board periphery
  • eMMC(Dependent on DIP switch S2C and/or module design either micro SD slot or eMMC is usable.)
  • Ethernet PHY
  • EEPROM
  • MAC EEPROM for Ethernet
  • FTDI USB to JTAG/UART bridge
  • 2 x CAN Transceiver
  • 6 x DIP Switch
  • Reset Button
• Power Supply
  
  • 5 V (2.1 mm power jack)
• Size
  
  • 140x110 mm
    
    

Required Hardware

• Trenz Electronic TEM0010 SoM

Scope of Delivery

• 1 x TEMB0010-01-A Basisboard for Trenz Electronic TEM0010 SoM

Additional Information

• Manufacturer's article number: TEMB0010-01-A
• Trenz Electronic TEMB0010 Wiki
• Support Forum