Digilent Inc.
Digilent Analog Discovery BNC Adapter Board
The Discovery BNC adapter board is intended to be used with the Analog Discovery tool to enable the use of standard BNC terminated test leads and probes.
Numero di variazione (MEPA): VAR-827003768
Codice produttore: 410-263
Codice doganale:
Il prodotto viene spedito da Riedlingen, Germania.
The Discovery BNC adapter board is intended to be used with the Analog Discovery tool to enable the use of standard BNC terminated test leads and probes. It provides BNC terminations to each of the two oscilloscope channels on the Analog Discovery. Each channel of the oscilloscope can be selected as AC or DC coupled by adjusting the jumper that is located behind that channels BNC input connector. In addition, the two AWG channels are also equipped with BNC terminations, and each channel can have either the 50-ohm or the 0-ohm termination selected. This enables the user to match the Analog Discoverys output impedance with either standard 50-ohm test leads or to be directly tied to the lead.
Note: The Analog Discovery BNC adapter board does not have differential analog (scope) inputs
Features
- Allows the use of standard BNC-terminated test leads & probes on your Analog Discovery
- Selectable AC and DC coupling to oscilloscope probes
- Selectable 50-ohm or 0-ohm output impedance on Arbitrary Waveform Generator (AWG) channels
- With the Discovery BNC, the differential scope inputs of the Analog Discovery become single-ended with the negative input connected to the ground.
Scope of Delivery
- 1 x Analog Discovery BNC Adapter Board
- 2 x standoffs
References
- Manufacturer: Digilent Inc.
- Manufacturer's article name: Analog Discovery BNC Adapter Board
- Manufacturer's article number: 410-263
Resources
