Articles fréquemment consultés
XMOD FTDI JTAG Adapter - AMD/Xilinx compatible (TE0790-03)
Universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS interface chip.
Référence de l’article: VAR-827003728
Numéro de produit du fabricant: TE0790-03
Code douane: 84718000
Article situé / expédié de : Riedlingen, Allemagne
The predecessor of this article is TE0790-02. All changes are in the Product Change Notification (PCN).
XMOD-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip.In the consigned default configuration Port A is JTAG and Port B is a serial interface.
FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single XMOD 12 x 8 Module.
Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).
NOTE: This adapter is compatible with AMD Tools!
The adapter not compatible with AMD-Tools can be found here: TE0790-03L
Notice
Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.
Key Features
- XMOD form-factor
- Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
- Size: 20 x 25 mm
- M3 mounting hole - FT2232H
- Channel B RX/TX LED's (on top, not visible from front)
- Mini USB connector (more rigid then micro USB)
- 93C56 EEPROM - Lattice XO2-256 CPLD
- On-board programmable using Lattice tools
- 8 universal I/O pins
- VCCIO either 3.3 V or user supplied (1.8Vto 3.3V)
- Red user LED (front visible)
- 12 MHz clock from on-board Oscillator - Step down DC DC Converter for optional power supply via USB-Power
- Green Power-on LED (front visible)
- User button (front accessible)
- 4 position DIP switch
- Choose CPLD program mode
- FTDI EEPROM disable (not implemented in PCB REV 1)
- Use VIO same as VCC
- Use VCC from USB
Scope of Delivery
- 1 x TE0790-03 with soldered header(USB cable not included with delivery)
Additional Information
- Manufacturer's article number: TE0790-03
- Trenz Electronic TE0790 Wiki
- Support Forum
All modules produced by Trenz Electronicare developed and manufactured in Germany.
| Caractéristique technique | Valeur |
|---|---|
| ID de l’art. | 103242 |
| État | |
| ID de l'ancien article | 01968567e89c72ed89fe60e7df96f046 |
| Modèle | TE0790-03 |
| Fabricant | |
| Pays de fabrication | Allemagne |
| Contenu | 1 pièce |
| Poids | 76 g |
