SoC-Module with AMD Zynq 7014S-1C, 1 GByte DDR3L, 8 GByte eMMC, 4 x 5 cm (TE0720-04-31C33MA)

AMD Zynq XC7Z014S-1CLG484C with Single-Core Prozessor, 1 GByte DDR3 SDRAM, 32 MByte Flash, 8 GByte e.MMC, size: 4 x 5 cm


Référence de l’article: VAR-827003671

Numéro de produit du fabricant: TE0720-04-31C33MA

Code douane: 84718000


Disponible pour expédition immédiate: 0

Délais d'exécution 3 jours. Pour les commandes d'une valeur totale nette inférieure à 70 euros, nous facturerons des frais de traitement de 20 euros.

Article situé / expédié de : Riedlingen, Allemagne


214,00 EUR *
Contenu 1 pièce



* Hors TVA hors Frais de livraison


This product is not always in stock, but will be produced on customer order (on demand).
Please ask for any minimum quantities.

The predecessor of this article is TE0720-03-31C33MA. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0720-04-31C33MA is a SoC module integrating a AMD Zynq Z-7014S, a Gigabit Ethernet transceiver,1 GByte DDR3 SDRAM,32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq 7000 platform.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least commercial temperature range of 0C to +70C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

  • AMD Zynq XC7Z014S-1CLG484C
  • Rugged for high shock and vibration
  • Single-Core ARM Cortex-A9 MPCore up to 766MHz
  • 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY) with SGMII
    • SGMII accessible on a board-to-board connector
    • MAC Address EEPROM
  • USB 2.0 high speed ULPI transceiver
  • 1 GByte(32-bit) DDR3 SDRAM
  • 32MByte QSPI Flash memory
  • 8GByte e.MMC (optional up to 32 GByte)
  • Plug-on module with 2x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4mm)
  • 152 FPGA I/O's (75 LVDS pairs possible) and 14 MIO's available on board-to-board connectors
  • On-board high-efficiency DC-DC converters
    • 4.0A x 1.0V power rail
    • 3.0 x 1.5V power rail
    • 3.0 A x 1.8V power rail
  • Temperature compensated real-time clock (RTC)
  • 3 user LEDs
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Valid MAC Address and 2K serial EEPROM
  • SHA-256 authentication chip with unique serial number
  • Evenly-spread supply pins for good signal integrity

Other assembly options for cost or performance optimization plus high volume prices available on request.

Depending on the customer design, additional cooling might be required.

Recommended Software

Vivado Standard Edition (free version)

The Vivado StandardEdition is the FREE version of the Vivado design suite.VivadoStandard delivers instant access to some basic Vivado features and functionality at no cost.

Overview Vivado Standard and Enterprise Edition

Development Support

There are different base boards available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TE0720-04-31C33MA Trenz Electronic 4 x 5 cm SoC Module with single core prozessor AMD Zynq XC7Z014S-1CLG484C
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronicare developed and manufactured in Germany.

The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.

Caractéristique technique Valeur
ID de l’art. 103185
État
ID de l'ancien article 01968567aa78737e8996cded4b190993
Modèle TE0720-04-31C33MA
Fabricant
Pays de fabrication Allemagne
Contenu 1 pièce
Poids 97 g