Häufig aufgerufene Artikel

Digilent Inc.

Digilent MCC 118 Voltage Measurement DAQ HAT for Raspberry Pi

12-bit, high-speed 8-channel voltage measurement DAQ HAT for use with Raspberry Pi


Artikelnummer VAR-827003844

Hersteller-Teilenummer: 6069-410-000

Taric/custom code:


Verfügbar für sofortigen Versand: 0
Verfügbar für sofortigen Versand: Mehr als 100
Verfügbar für sofortigen Versand: ${ $store.getters.currentItemVariation.stock.net }

Importierter Artikel wird versendet ab D-Riedlingen.




Loggen Sie sich ein und erhalten Sie bessere Preise. Oder kontaktieren Sie uns und fragen Sie nach dem B2B-Status .

* Exkl. MwSt. exkl. Versandkosten

The Measurement Computing MCC 118 is a voltage HAT (Hardware Attached on Top) board designed foruse with Raspberry Pi. It provides eight single-ended (SE) analog inputs with a +/-10V input range. A bidirectional clock I/Opin lets userspace operations with an external clock signal or with the boards internal scan clock. Use software to set the direction. The external digital trigger input is software-configurable for rising or falling edge, or high or low level. The MCC 118 is powered with3.3 V provided by the Raspberry Pi through the GPIO header connector.

HAT configuration parameters are stored in an on-board EEPROM that allows the Raspberry Pi to automatically set up theGPIO pins when the HAT is connected. The open-source MCC DAQ HAT Library of commands in C/C++ and Python allowsusers to develop applications on the Raspberry Pi using Linux. The MCC DAQ HAT Library supports operation withmultiple MCC DAQ HATs running concurrently. Console-based and user interface (UI) example programs are available for each API.

Key Features

  • 8 SE 12-bit voltage inputs
  • 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
  • +/-10 V input range
  • Onboard sample buffers allow high-speed acquisition
  • External scan clock I/O
  • External digital trigger input
  • Screw terminal connections

Scope of Delivery

  • One MCC 118 DAQ HAT
  • 2x20 Header connector (plugs into the 40 pin GPIO connector on the Pi board)
  • Jumpers (3)
  • Standoffs (4)
  • Screws (4)
  • Nuts (4)
  • Printed insert: Getting Started with MCC DAQ HATs
  • MCC packaging assembly/foam, etc.

References

  • Manufacturer: DigilentInc.
  • Manufacturer'sarticle name: MCC 118 Voltage Measurement DAQ HAT for Raspberry Pi
  • Manufacturer's article number: 6069-410-000

Resources

Other Digilent products are available on request.